192.168.100.1 is a default IP address which must be entered in the location bar of your favored program on the off chance that you need to get to your switch’s settings page where you can change the default secret key, investigate organizing issues, secure your system, etc. A default IP address is an IP utilized by numerous switch makers as an approach to get to and arrange the switch. For this situation the IP 192.168.100.1 is a default IP address for switch makers like D-Link or Netgear. The fame of these two brands made the IP 192.168.100.1 a standout amongst the most prominent IP delivers today beside IP 192.168.0.1 and IP 192.168.0.1.1.
If this IP address 192.168.100.1 is attempted to login to the router console, your attempt with the false IP address. The right IP address is 192.168.100.1 and this IP address is used for login to the router where the IP address 192.168.100.1 is setup. In a networking device, without this default IP address, alternative IP addresses are found and those are called hosts.
All modern networking devices use IP address 192.168.100.1 from factory. When you signed in the switch administrator board of the switch, the client can get to the highlights of the switch. The switch can be balanced, for example, LAN, WAN, IP Qos, DNS, Proxy, ADSL, WLAN settings, security alternatives, MAC, DSL, WPS and so on from the switch support, client can hinder the gadgets and association can be controlled.
How to login to the address of 192.168.100.1?
Open the browser address bar, type the correct IP address 192.168.100.1 open the browser URL and press on the enter button. Type the username and password when the login page comes of the router. Now the user can access the control panel for wireless router operation.
Use 192.168.100.1 to connect to the router:
192.168.100.1 is IP address utilized by a few switch manufacturers as default address for the switch itself. This location is generally utilized by some 4 Com Office Connect switches, Netopia Internet passages and a few brands of broadband modems. Address http://192.168.100.1/telex is normally utilized by Telex switches.. As an outcome 192.168.100.1 is probably going to be set as default entryway on PCs associated with the switch. http://192.168.100.1 additionally for the most part contains web-interface that controls switch’s design. On the off chance that you are unfit to get to this location almost certainly, you have some sort of system setup issue.
What do I do if I forget my modem’s username and password?
In the event that you can’t recall the username or password, it is extremely straightforward. The main way is reset your switch for the production line settings, hold the reset catch for 15 seconds, sit tight for your Power, WLAN and Internet lights to actuate. It will achievement.
In this procedure, it will break your web association, in light of the fact that your web settings will be broken after that. Also, when you have reset the switch, all your unique settings will be dropped and all settings will be reestablished to the production line settings.